Desalination Process

Sea water must undergo a desalination process before it's safe to drink.
••• sea water image by qadro from Fotolia.com

Reverse Osmosis

Reverse osmosis, or the RO process, removes about 95 to 99 percent of the dissolved salts and inorganic material found in seawater, resulting in a safe, purified, salt-free drinking water. It is the finest level of filtration available for the conversion of seawater to drinking water and creates clean healthy water with a pleasing taste. The process involves pushing seawater through a semi-permeable membrane that traps salt and other impurities and then through microscopic strainers to further the filtration process.

Pre-Treatment

In the reverse osmosis (RO) desalination process, seawater is pre-treated, which helps to preserve the filtration membranes as seawater is pushed through them under pressure to remove the salt. The pre-treatment process changes the consistency of the water before it continues on through micro-filters that provide even more protection to the reverse osmosis membranes. The water then filters through a microscopic strainer that further removes any impurities, bacteria, and dissolved salts in the water. Although the RO membranes are typically successful at removing up to 99 percent of the bacteria in the water as well as dissolved salts, the quality and general wear of the RO membranes greatly affects the level of inorganic compounds successfully removed from the water as well as the amount of feed-water that is wasted in the process.

Feed Water

About 50 percent of the feed-water that passes through the RO filtration system will be used as the finished product. The other 50 percent becomes a brine solution that contains the concentrated salts and impurities that were removed through the filtration process, which is discarded during the desalination process. The portion that will become drinking quality water will pass through a post-treatment process, during which the alkaline levels of the soft water are raised and balanced in order to protect the water's distribution system from corrosion. Chlorine may also be added for the purpose of cleaning and maintaining the water distribution and storage systems.

Related Articles

Effects of Lime & Alum on Water Purification
How Does the Excretory System Respond to Physical Activity?
Different Ways to Raise the pH of Drinking Water
What Are the Effects of Leaching?
Why Does Drinking Salt Water Dehydrate You?
Potassium Permanganate Water Treatment
What Is the Human Impact on the Freshwater Biome?
Separation Techniques to Treat Water Sewage Treatment...
What Is the Process of Water Treatment?
How Does Water Get Cleaned?
What Happens After You Put a Carrot in Saltwater?
What Advantages Do Cell Walls Provide Plant Cells That...
What Is Lime Used for in Water Treatment?
The Effects of Sewage on Aquatic Ecosystems
Brine Vs. Conductivity
How to Remove Total Dissolved Solids From Drinking...
What is the difference between hard and soft water?
What Part of the Nephron Is Responsible for the Reabsorption...
The Disadvantages of Desalination

Dont Go!

We Have More Great Sciencing Articles!